![HB Restoration](/img/default-banner.jpg)
- Видео 32
- Просмотров 4 021 959
HB Restoration
США
Добавлен 3 июл 2022
Welcome to HB Restoration !
My channel is about the restoration of various vintage and old things. I hope it brings a lot of value to everyone.
Thanks so much for watching ! Like and subscribe to support the channel ^^
My channel is about the restoration of various vintage and old things. I hope it brings a lot of value to everyone.
Thanks so much for watching ! Like and subscribe to support the channel ^^
Broken Bench Grinder Restoration
I found a completely broken bench grinder at a used tool store. It had been left outside for a long time, completely rusted, with the motor shaft seized and some parts broken. From the label on the machine, I was able to find the specifications, origin, and manufacturer. I restored it completely, let's watch together!
* Bench grinder Information *
- Brand: TRADE THREE-F MARK
- Model: D8800
- VOLTS: 100V
- Power : 150W
- Curent : 1,8/1,6A
- Frequency: 50/60 Hz
- Wheel size: Ø150×t19×Ø12.7 (A80P) Ø150×16.4×Ø12.7 (A60P)
- Shaft: 12,7 mm
- No load speed: 2850/3450 rpm
- Net Weight : 8kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and sub...
* Bench grinder Information *
- Brand: TRADE THREE-F MARK
- Model: D8800
- VOLTS: 100V
- Power : 150W
- Curent : 1,8/1,6A
- Frequency: 50/60 Hz
- Wheel size: Ø150×t19×Ø12.7 (A80P) Ø150×16.4×Ø12.7 (A60P)
- Shaft: 12,7 mm
- No load speed: 2850/3450 rpm
- Net Weight : 8kg
I'm very happy to receive your feedback, advice, suggestions to improve myself.
-------------------------
Like and sub...
Просмотров: 34 825
Видео
Cordless Rebar Cutter Restoration | Makita SC160DRA
Просмотров 232 тыс.Месяц назад
I just purchased a Cordless Rebar Cutte for $30. Upon investigation, I discovered its model is Makita SC160DRA, manufactured by a Japanese brand. The motor and gears are heavily rusted, stuck, and non-functional. In this video, I will restore its functionality and assemble a new lithium battery pack for it. *Rebar Cutte Information * Brand: Makita Model: SC160DRA Voltage : DC12 Volts Cutting ...
Cordless Universal Shear Restoration | Bosch GUS 7.2V
Просмотров 25 тыс.2 месяца назад
This is a cordless universal shear from the Bosch brand, model Bosch GUS 7.2V-935. I found it at a vintage Japanese tool store. It is not functional and rusty. In the video, I will restore its functionality and install a new lithium battery for it. I hope you will enjoy the video ^^ Like and subscribe to support the channel ^^ Thank you so much for watching !! Have a nice day ^^ #restoration #r...
Restoration of Impact Driver Milwaukee M18 2656-20
Просмотров 28 тыс.2 месяца назад
I bought a screwdriver for $8 at a used tool store. It's from the Milwaukee brand, with the model number M18 2656-20. The body of the tool is split in half due to high-intensity usage, but the other components are still functioning well. In the video, I will clean and restore the damaged parts * Impact drive Information * - Brand : Milwaukee - Cat No : 2656-20 - IPM : 0 - 3,450 - Maximum Torque...
Vintage Flashlight to Super-bright LED Conversion | Makita ML903
Просмотров 37 тыс.3 месяца назад
I recently purchased a vintage Makita flashlight from a secondhand Japanese goods store. It uses incandescent bulbs, so the light output is quite weak. I have an idea to convert it into a super-bright LED light. In the video, I also built a new lithium battery pack to replace the old one that was faulty. I'm very happy to receive your feedback, advice, suggestions to improve myself. Like and su...
1973 Bench Grinder Restoration
Просмотров 140 тыс.4 месяца назад
This video depicts the restoration process of a bench grinder with many years of history. According to the label on the machine, it was manufactured in 1973. The grinder has undergone years of challenging operation, with some functions and components damaged due to rust. I found it at a Japan recycle store and have an idea to restore it. Let's watch together! * Bench grinder Information * - Bra...
Restoration of the Rusty Vintage Impact Driver - Hitachi WH8DB3
Просмотров 48 тыс.5 месяцев назад
I purchased it for $4. It's a rusty vintage Hitachi Impact Driver, model WH8DB3. Due to water damage, its electric motor suffered severe rusting, and the battery is no longer functional. In this video, I will demonstrate the restoration process, including repairing the electric motor and upgrading the battery from Ni-Cd to lithium * Impact drive Information * - Brand: Hitachi - Model: WH 8DB3 -...
Cordless Circular Saw Restoration | Hitachi C5D
Просмотров 38 тыс.6 месяцев назад
I just found an old vintage cordless circular saw. It is of the Hitachi brand, model Hitachi C5D. It is in rusty condition and the battery is damaged. In the video I will restore the parts and make it a new lithium battery * Impact drive Information * Brand:Hitachi Blade: Material High Speed Steel Surface Recommendation: Wood Power Source: Battery Powered Product Dimensions: 370mm(L)*200mm(W)...
Restoration Of Impact Driver Makita TD122D
Просмотров 93 тыс.6 месяцев назад
I just found a Makita brand impact driver from a Japanese second hand store, Model Makita TD122D. it was broken and rusted. In the video I will remove rust, check operation, replace some broken and lost parts. * Impact drive Information * - Brand: Makita - Model: TD122D - VOLTS: DC12V - Hex Shank: 6.35 mm (1/4") - Rotation speed:0-2600 min-1 - Number of blows ~32000 min-1 - Max Fastening Torque...
Restoration Of Rusty Bench Grinder Makita 9300
Просмотров 354 тыс.7 месяцев назад
I just found an old bench grinder that no longer works. It is manufactured by the Japanese brand Makita, model makita 9300. It is in a jammed condition and completely rusted. In the video I will remove rust, paint and replace a few broken parts. * Bench grinder Information * - Brand: Makita - Model: 9300 - VOLTS: 100V - Frequency 50/60 Hz - Wheel size: 125mm - Shaft: 12,7 mm - No load speed: 36...
Building Alternative Makita Battery 20V 5Ah | BL2050B
Просмотров 5 тыс.7 месяцев назад
This video is about the battery building process for makita power tools. Battery case model BL2050B 20V voltage used for all popular makita power tools. I'm very happy to receive your feedback, advice, suggestions to improve myself. Like and subscribe to support the channel ^^ Thank you so much for watching !! Have a nice day ^^ #makitabattery #battery #BL2050B #Makita20VLi-ion #MakitaBattery20...
Cord To Cordless 20V Angle Grinder Conversion
Просмотров 283 тыс.7 месяцев назад
I have an old angle grinder, manufactured by the makita brand, model M965. It runs weak, gets hot and smokes. I have an idea "cord to cordless 20V angle grinder conversion". After conversion, the angle grinder works well, can cut metal iron, and can be used for angle grinding "DC Motor Technical Details" Model: D.C 775 MOTOR Dia. of Shaft: 5mm Current: 10-20A Speed: 7600-12000RPM Net weight: 35...
Restoration Of Vintage Cordless Hedge Trimmer Makita UH3000D And Upgrade 8.4V Lithium Battery For It
Просмотров 14 тыс.8 месяцев назад
I found a vintage cordless hedge trimmer at a used Japanese store.It is produced by makita brand, model UH3000D. The blade part has rusted, the motor no longer worked, the Ni-mh battery did not work either. In this video I will restore them and upgrade the battery from Ni-mh to 8.4V Lithium battery * Hedge Trimmer Makita UH3000D Technical Details * - Brand: Makita - Model: UH3000D - Power Sourc...
Restoration Of Stick Impact Driver Panasonic EZ7521 And Make A Lithium Battery From PVC Pipe For It
Просмотров 212 тыс.9 месяцев назад
I just found a Stick Impact Driver, it was made in China by Panasonic, model EZ7521 . The entire body of the device is rusted, stuck and it has no battery. In the video, the couple restored its functionality and made a battery for it from pvc pipes * Rechargeable Stick Impact Driver Panasonic EZ7521 Technical Details * - Brand Panasonic - Model EZ7521 - Chuck: One-touch bit locking system (11.5...
Heavy Duty Demolition Hammer Restoration | Makita 8900N
Просмотров 79 тыс.9 месяцев назад
In this video is the entire process of restoring a Heavy Duty Demolition Hammer Makita 8900N. I bought it back at a Japanese recycling store. In the video you can see it is very old, rusty and not original. I will refresh, replace, restore those details. Hope it brings some value to you * Demolition Hammer Makita 8900N Technical Details * - Brand Makita - Model 8900N - Wattage 1050W - Speed 140...
Deep Cut Portable Band Saw Restoration | Hitachi CB 10SA
Просмотров 105 тыс.10 месяцев назад
Deep Cut Portable Band Saw Restoration | Hitachi CB 10SA
1975 Disc Grinder Restoration | Hitachi PDh-180B
Просмотров 790 тыс.11 месяцев назад
1975 Disc Grinder Restoration | Hitachi PDh-180B
Restoration Of Cordless Hackzall Reciprocating Saw Milwaukee 2625-20 M18
Просмотров 30 тыс.Год назад
Restoration Of Cordless Hackzall Reciprocating Saw Milwaukee 2625-20 M18
Restoration Of Heavy Duty Rotary Hammer Drill Hitachi PR-50
Просмотров 14 тыс.Год назад
Restoration Of Heavy Duty Rotary Hammer Drill Hitachi PR-50
Restoration Of Electric Reciprocating Saw Hilti WSR 900-PE
Просмотров 12 тыс.Год назад
Restoration Of Electric Reciprocating Saw Hilti WSR 900-PE
Restoration Of Old Electric Water Pump
Просмотров 155 тыс.Год назад
Restoration Of Old Electric Water Pump
Restoration Of Electric Demolition Hammer Makita HM0811
Просмотров 97 тыс.Год назад
Restoration Of Electric Demolition Hammer Makita HM0811
Restoration Of Electric Circular Saw Makita 5800N-A
Просмотров 219 тыс.Год назад
Restoration Of Electric Circular Saw Makita 5800N-A
Restoration Of Hammer Drill Heavy Duty Makita 8416
Просмотров 17 тыс.Год назад
Restoration Of Hammer Drill Heavy Duty Makita 8416
Rusty Impact Driver Restoration | Hitachi WH 12DM
Просмотров 315 тыс.Год назад
Rusty Impact Driver Restoration | Hitachi WH 12DM
Rebuild The Battery And Refresh Old Model Cordless Drill & Driver 7.2V | National EZ505
Просмотров 12 тыс.Год назад
Rebuild The Battery And Refresh Old Model Cordless Drill & Driver 7.2V | National EZ505
Old Model Cordless Drill Restoration | Hitachi D6D
Просмотров 34 тыс.Год назад
Old Model Cordless Drill Restoration | Hitachi D6D
Rusty Angle Grinder Restoration | Ryobi Angle Grinder
Просмотров 72 тыс.Год назад
Rusty Angle Grinder Restoration | Ryobi Angle Grinder
Cross point screws come out much better if you use the correct size screwdriver bit !
^^ many thank
Excellent!!! Great job fabricating the missing wheel covers !
^^ many thank
hábitos alimentares errados são as maiores causas da obesidade. descubra quais são no vídeo 👉🏾 ruclips.net/video/jj7UcyeLeSY/видео.html
❤️
見事な修理技術で、外装部やグリップが生き返りましたね! モーターの中心部の調整がいらないのは、さすがは日本製!
Japanese products are of very good quality
Якби то Я розбирав, то розламав би, і корпус, і двигун, і кнопку, нічого б не вижило
I think it's not that bad 😅
Красавчики пацани, гарно зробили❤❤❤
😍 many thank
Muito bom esse vídeo
many thank 🥰🥰🥰
Im doing this for the fuel version of this saw. What grease are you using?
How did you re-create the sticker?
I found information from old labels then redrawn it with software and printed it
Holymoly smashes all the screws. use oil!
I use wd 40
You overtightened the acrylic cover mounts. You can see the crazing on the hinge mount. That's rough. Otherwise, I enjoyed your restoration.
Many thank ^^
Nice😊
🥰🥰🥰🥰❤️❤️❤️
Yo wd 40 isn’t oil
😅But am I using it correctly?
Good job, man.
🥰🥰🥰 many thank
Is that engine oil?😅 Put some hydraulic oil instead.
Temporary use 😂 not available at home
Great restoration!
Many Thank ^^🥰
Milwaukee C18HZ Today I fixed the same saw that I paid $1 for. The machine worked unevenly (fast/slow). I washed the master switch in alcohol and blew out the switch with compressed air. Now it works like new! Greetings from Switzerland
I'm glad to see someone fix something congratulations
nice work :3
BTW the other commenters are talking about penetrating oil and a torch mean to apply penetrating oil ( a very thin oil which can go into the small space between the screw and body ) and a blowtorch on the screw, the blowtorch will heat the metal and cause it to expand, allowing the screw to break some of rust and come loose, as well as annealing the metal so it isn't as brittle, preventing catastrocatastrophic shearing, I.e. breaking of the screw
many thank 🥰
Great restoration, you don't see many portable grinders these days. Wouldn't mind having that one myself :)
thank you ^^ have a nice day
For your next project, I suggest that vise.
😂 really
THANKIOUPR❤❤❤❤❤❤❤❤❤❤❤❤❤
❤️❤️❤️ many thank🥰🥰🥰 have a nice day
Why no WD-40 on the screws and bolts? No wonder they break.👎
Did you watch the whole video? I used wd 40
Amazing job, that’s a true restoration. Your channel is going to take off 😊
many thank ^^
No way that rotor was original. WAY too clean.
It's actually very clean
Incredible work, great video 😊
🥰🥰🥰 many thank
What's wrong with penetrating oil and heat?
I tried using heat and oil but it didn't work. Or maybe I have to soak it in oil for a long time
I'd have tossed it in the wheelie bin as soon as I saw that motor. Never been a fan of using WD-40 as a lubricant, since it's a degreaser
I don't use wd 40 for lubrication
8:25... there is no real reason to give up...don't be hypocrite my friend...hhh 🤨🤨
When those two screws broke, I thought about giving up. I've never restored anything with so many broken screws.
Nice job and all that. I don't think I've ever seen a motor that splits along the axis parallel to the shaft. It seems like a pretty good design.
thank you ^^ I think this design is quite good for small machines
wieso zwei mal schlagen
😅
👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏
🥰🥰🥰
Супер 👍🏽
thank you ❤️❤️❤️have a nice day
Kojarzysz taki smar WD-40 ? Pomaga luzować zapieczone śruby.
In the video I used wd-40 but it didn't work. Steel screws screwed into aluminum surfaces are very difficult to open when rusted
Ножовка по металлу .......!
what do you mean?
At the beginning I was thinking " no way he gets this running again". Amazing job
When I restored it, I thought it wouldn't work anymore😅
very nice work
many thank 🥰🥰🥰
A real restoration
thank you ❤️❤️❤️
Super jest to odrestaurowane ta bardzo super stara ślifierka pozdrawiam serdecznie 👍👍👍👍👍
thank you 🥰🥰🥰
Разборка просто ужас. Н и когда не делайте так!
🥲
Can you please provide the name of the tool you used to remove the screws and a link to it, if possible
vn.shp.ee/g36KqTc
Этот инструмент забыт за правду, восстановление его доказало.😊
🥰🥰🥰
Great job. Brazil 😊
Many thank ^^ have a nice day
next old cordless grinder
I haven't found a wireless device yet. Can I convert from a wired device to a wireless one?
@@hbrestoration go
THINK I'M CALLING BULLSHIT ON FIXING THAT MOTOR!!!
😅
👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷
have a nice day ^^
Гребёнки нет, защиты от обратного удара (тормоз цепи) нет. Плохая пила.
I don't know if the machine is original or not 🥲
Dude... Ever heard of penetrating oil and torch?
What do you mean?😅
Dude sure Hulked out on -those cover guard- *all of the* screws. I'm surprised more didn't break.
@@hbrestorationOil Durex 🤣
@@scottcates it cannot be broken in one go, mostly it is to block small iron filings
@@Alex.T80 😅 Really, I don't understand what he said
❤
many thank ❤️❤️❤️
Lovely 😍
many thank ❤️❤️❤️ have a nice day
Love no talk no music videos
❤️❤️❤️ have a nice day